Feed Pro-Line Textured Dairy Feed in combination with good quality forage. For milking cows, feed at the average rate of 1.0 kg of feed for every 2.5 to 3.0 kg of milk in combination with good quality forage. When forage is poor, increase the amount of concentrate. For dairy cows, the concentrate portion of the diet should constitute a maximum of 60% of the total diet. Always provide access to clean, fresh water.
The following table indicates the maximum allowable daily intake of Pro-Line Textured Dairy Feed for different body weights:
|Body weight (kg)||400||500||600||700|
|Maximum Daily Intake (kg) (as fed)||8.0||10.0||12.0||12.8|
If the forage type or quality changes, consult your local Hi-Pro representative to review your feeding program.
- Directions for use must be carefully followed.
- Do not use this feed in association with another feed containing supplemental Selenium.
- Do not exceed feeding rates outlined in table above.
Individual results from the use of this product may vary due to management, environment, genetics, health and sanitation differences. Therefore, Hi-Pro Feeds LP does not warrant or guarantee individual results.
A list of the ingredients used in this feed may be obtained from the manufacturer or registrant. This feed contains added Selenium at 0.5 mg/kg.
|Crude Protein (min)||16.0%||Phosphorus (act)||0.8%|
|Crude Fat (min)||2.0%||Vitamin A (min)||13,500 IU/kg|
|Crude Fibre (max)||8.0%||Vitamin D (min)||2,500 IU/kg|
|Sodium (act)||0.4%||Vitamin E (min)||50 IU/kg|